The library only charges fees for materials and components the library provides. This includes ink and toner in the various printers, as well as maintenance items like filter cartridges for the laser’s air filter. Material and maintenace costs continue to rise, so starting in January 2026 we will be increasing our prices to the following:
| 3D Prints (PLA) | $0.20 per gram |
| Acrylic, clear – 12″ x 12″ x 1/8″ sheet | $10.00 each |
| Banners | $4.00 per linear foot ($4 minimum) |
| Book Repairs | $1.00 each |
| Buttons – 1.5″, 2.25″ | $0.20 each |
| Buttons – 3″ | $0.30 each |
| Grommets | $0.50 each |
| Heat Transfer Vinyl | $8.00 per linear foot ($8 minimum) |
| HTM Transfer Tape | $1.00 per linear foot ($1 minimum) |
| Key Chains – 1.5″, 2.25″ | $0.50 each |
| Laminated items | $0.20 per inch |
| Laser usage with your own materials | $2.00 per 30 minutes ($2 minimum) |
| Magnets – 1.5″, 2.25″ | $0.40 each |
| MDF – 12″ x 12″ x 1/8″ sheet | $9.00 each |
| Photo Paper, Glossy (for vinyl printer) | $4.00 per linear foot ($4 minimum) |
| Photo Paper, Matte (for vinyl printer) | $4.00 per linear foot ($4 minimum) |
| Photographic prints – 4″ x 6″ | $0.50 per print |
| Photographic prints – 5″ x 7″ | $1.00 per print |
| Photographic prints – 8″ x 10″ | $1.50 per print (bring your own paper) |
| Photographic prints – 8.5″ x 11″ | $2.00 per print |
| Photographic prints – 13″ x 19″, or over 8.5″ x 11″ | $4.00 per print (bring your own paper for sizes other than 13×19) |
| Plywood, Basswood – 12″ x 12″ x 1/8″ sheet | $4.00 each |
| Static Clings (for vinyl printer) | $4.00 per linear foot ($4 minimum) |
| Vinyl – 3mil, 6mil, Removable (for vinyl printer) | $4.00 per linear foot ($4 minimum) |
Fees include:
- Any white/blank/extra space on prints
- Rafts/brims/supports on 3D prints
- Failed prints
- Prints that do not complete before the reservation expires
3D objects are weighed at the end of the print.
Objects created on the vinyl printer are measured by the linear foot and rounded up to the nearest foot – so a 5’ 3” banner would be rounded up to 6’, and cost $24.
Visit the makerspace homepage for more information on the equipment.
Page reviewed: 19 December 2025